TAMPER RESISTANT SIGN CLAMPS

NO BAND CUTTING NO SHARP EDGES NO CUMBERSOME TOOLS 16mm (5/8") wide band High strength, all stainless steel construction Hardened tamper resistant screw with unique recessed seven-sided socket Auto locking safety buckle ensures the free end of the band is safe and tidy (Worldwide patents pending). Seven sizes cover almost all applications Easily readjusted or reused

Typical applications include

Signs (Temporary or Permanent)
Waste Bins
Control Box Security

Street Lamps
Hanging Baskets

Christmas decorations

Standard Range
Size	For Post Diameters		Box Quantity
	mm	inches
70	55 – 70	2 ^1/8 – 2 ¾	50
100	70 – 100	2 ^3/4 – 4	50
130	100 – 130	4 – 5 ^1/8	50
160	130 – 160	5 ^1/8 – 6 ^1/4	50
190	130 – 190	5 ^1/8 – 7 ^1/2	25
250	190 – 250	7 ^1/2 – 9 ^7/8	25
340	250 – 340	9 ^7/8 – 13 ^3/8	25
For close fitting brackets, it will be necessary to allow for the extra band length that a U bracket or similar will require

The necessary tools

1/4" square ratchet driver complete with a socket bit.

1/4" Square Socket Bit for use with either the above or other ratchet spanners

1/4" hex 50mm long bit for direct insertion into cordless drill/drivers. Two bits per bag.

A screwdriver and T - bar combination tool with non removable bit

For the quickest fixing time it is recommend that a cordless drill/driver (fitted with a Power Bit) , followed by a final tightening with either the Ratchet Spanner or the Driver in its T-Bar position

How the system works

1. Slide the buckle onto the band in the direction of the arrow and push around to the housing

2. Thread the band through the slots in the sign and around post

3. Engage the band into the screw housing and screw band through by approximately 50mm

4. Locate the tongue of the buckle in the 4th slot of the band. Screw the band through using a hand or power tool.

5. Hold down any excess band just before the buckle is clamped. Finally tighten with the Tamtorque T - bar driver or ratchet spanner.

6. Push any remaining excess band through the buckle for a safe, tidy job. Tamtorque can be released and repositioned if required.

Material Specification
Band, Housing, Buckle
BS/AISI 304 - DIN1.4301 stainless steel

Screw
BS/AISI 410 - DIN 1.4006
heat treated to 1220N/mm²

Recommended Tightening Torque
10 - 15 Nm   90 - 130lb.in